High & Low Temperature Chamber can realize both high and low temperature test.
It can continuously run for long time.
Controller display easy to understand and operate.
Model | Size (cm) (D×W×H) | Temperature | Power | ||||
Test area size | Capacity | External size | Range | Fluctuation | Change rate | ||
WD101 | 47×50×60 | 141L | 88×68×124 | - 12~100 or 150℃ | ±0.5℃ | Heating: 3~5℃/min
Cooling: 0.8~2.5℃/min | 2.0Kw |
WD102 | 60×55×75 | 248L | 100×68×155 | 2.0Kw | |||
WD105 | 70×80×90 | 500L | 136×138×186 | 2.5Kw | |||
WD110 | 100×100×100 | 1000L | 163×140×198 | 2.5Kw | |||
WD201 | 47×50×60 | 141L | 88×68×124 | - 22~100 or 150℃ | ±0.5℃ | 2.0Kw | |
WD202 | 60×55×75 | 248L | 100×68×155 | 2.0Kw | |||
WD205 | 70×80×90 | 500L | 136×138×186 | 3.5Kw | |||
WD210 | 100×100×100 | 1000L | 163×140×198 | 3.5Kw | |||
WD401 | 45×50×60 | 135L | 105×89×150 | - 40~100 or 150℃ | ±0.5℃ | 4.0Kw | |
WD402 | 50×60×75 | 225L | 109×99×165 | 4.0Kw | |||
WD405 | 70×80×90 | 500L | 133×122×190 | 4.5Kw | |||
WD410 | 100×100×100 | 1000L | 163×140×198 | 5.0Kw | |||
WD501 | 45×50×60 | 135L | 105×89×150 | - 50~100 or 150℃ | ±0.5℃ | 5.0Kw | |
WD502 | 50×60×75 | 225L | 109×99×165 | 5.5Kw | |||
WD505 | 70×80×90 | 500L | 133×122×190 | 5.5Kw | |||
WD510 | 100×100×100 | 1000L | 163×140×198 | 6.0Kw | |||
WD701 | 45×50×60 | 135L | 105×89×150 | - 70~100 or 150℃ | ±0.5℃ | 5.0Kw | |
WD702 | 50×60×75 | 225L | 109×99×165 | 5.0Kw | |||
WD705 | 70×80×90 | 500L | 133×122×190 | 6.0Kw | |||
WD710 | 100×100×100 | 1000L | 163×140×198 | 8.0Kw | |||
External material | Printed cold-rolled steel plate |
Test area material | SUS304 stainless steel |
Insulation material | Super glass cotton |
Seal material | Resistant-to-high-temperature silicone rubber |
Controller | FUJI temperature controller with PID imported from Japan |
Work mode | Fix and Programmable |
Other electric parts | SIEMENS and Omron relays |
Compressor | France TECUMSEH compressor or U.S. Copeland Emerson compressor |
Cooling mode | Air cooling |
Condenser / Evaporator | Condenser/Evaporator |
Other cooling parts | expansion relief valve, electromagnetic control valve, drying filter, pressure controller |
Heater | Nickel-chromium alloy heating wire, and electric relay with over-heat protection |
Sensor | Pt100 platinum resistance temperature sensor |
Air circulation | Stainless steel long-axial fan compulsory circulation |
Safety parts | Over-heat protection, Over-load of fan protection, Over-load of compressor, Short-circuit protection, Lack phrase protection, Ground protection |
Other structure parts | φ50mm port hole， 2 levels of stainless steel try，Defrosting window，Light |
Power supply | 220±22V, 50~60Hz or 380±38V, 50~60Hz |
LiveChatclose
Send Email
SHJIANHENG
WhatsApp